123 hp customer support

Ready to help you!
Call us

123 hp customer support
Call US

HP Smart Tank 675 Setup and Install

Even if you are new to the 123.hp.com/ST675 printer device, you will never feel the difficulty in setting up with 123 HP Printers. The printer has features that are easy for users to setup and use.

HP Smart Tank 675 Setup

Step 1: Remove the HP Smart Tank 675 from the printer box

  1. Unbox the printer and place it on a safe surface.
  2. Makes sure the location is close to the device and the router.
  3. Remove all the protective material from the printer.
  4. The HP Smart Tank 675 printer should be close to the power supply.

Step 2: Connect the power cord to the HP Smart Tank 675

  1. Remove the power cord from the printer box and connect it to turn the printer on.
  2. Following this, connect the power cord to the rear end of the wireless printer.
  3. Connect the other end of the cord to the power supply.
  4. Power up the printer by turning on the power supply.

Step 3: How to fill ink into the HP Smart Tank 675

  1. Take the ink from the boxes and use the color code as a guide.
  2. Fill in the tank with sufficient ink cautiously.
  3. Using the color code, fill the ink tanks of the HP Smart Tank 675 printer.
  4. Make sure the ink is filled to the correct level.

Step 4: Load paper into the HP Smart Tank 675 input tray

  1. Draw out the paper feeding tray and load sheets of paper onto it.
  2. Take quality sheets of paper a place them on the tray.
  3. Note that the paper that is loaded should be aligned properly.
  4. The same should be done for the tray as well.

Step 5: Install the HP Smart Tank 675 Software

  1. After the physical setup of the HP Smart Tank 675 printer is complete.
  2. To download the HP Smart Tank 675 printer driver, open the website.
  3. Download the printer driver and complete the installation.
  4. To complete the installation, all the on-screen instructions will be completed.

Step 6: HP Smart Tank 675 Connections

  1. The final step is to complete connecting the HP Smart Tank 675 printer to a connection.
  2. During the process of the installation of the HP Smart Tank 675 driver, the connection has to be made.
  3. Choose the wireless connection as prompted by the installation wizard. Following this, choose the wireless connection.
  4. Enter the credentials and complete the connection of the HP Smart Tank 675 to the connection.

HP Smart Tank 675 Driver Download

HP Smart Tank 675 Driver Download for Window

  1. Choose a suitable browser and find a support driver download page.
  2. Type in the relevant printer model to help with HP Smart Tank 675 Driver Download and begin to search.
  3. Once the search is loaded, the webpage will list available drivers for the printer model.
  4. Find a suitable driver package after analyzing the features and open the support website to complete the download.
  5. Finally, run the downloaded software on your device.

HP Smart Tank 675 Driver Download for MAC

  • Start by downloading the updated software from a reasonable website.
  • Find the available browser on the MAC system and look for the driver download page.
  • Enter the printer model HP Smart Tank 675 to get quality featured software for your printer.
  • Read through the driver package and choose a preferable one to download.
  • Activate the setup file to help with a great printing experience.
123 HP Support

Troubleshoot your hp printers problems with the help of our technical experts

123 hp customer support

Wireless Setup for HP Smart Tank 675

HP Smart Tank 675 wireless setup for Windows

Follow the steps to complete setting up the HP Smart Tank 675 wirelessly for Windows

  1. Connect the wireless printer and the wireless router using the WPS push button method,
  2. For this, choose the WPS button on the wireless router and the same should be done on the printer.
  3. Make sure it is pressed down at the same time. Give it a few seconds to connect.
  4. The HP Smart Tank 675 printer is now connected to a wireless connection.

HP Smart Tank 675 wireless setup for Mac

  1. Power up the Mac and the HP Smart Tank 675 printer.
  2. Download the HP Smart app on your Mac.
  3. Run the app and connect it to the printer.
  4. Choose the plus icon on the app and add the HP Smart Tank 675 printer.

How to print documents using the HP Smart Tank 675

How to print documents using the HP Smart Tank 675 on Windows

  1. Begin the process by checking if there is an active wireless connection.
  2. Following this, load paper onto the paper feeding tray and align it.
  3. Move over to the device and complete the print settings for the file.
  4. Shoot print and the print command will be sent to the printer.
  5. Ensure the file is printed as per the settings and requirements.

How to print documents using the HP Smart Tank 675 on OS X and Mac

  1. Ensure there is a connection that is active between the printer and the device.
  2. Move over to the printer’s paper feeding tray and load high-quality sheets of paper.
  3. Following this, ensure that all the settings are made for the file that is to be printed.
  4. Complete a check to ensure the paper and the paper feeding tray are aligned.
  5. Shoot the printer from the OS X or Mac device for a successful print.

Printer photos using the HP Smart Tank 675

How to print photos using the HP Smart Tank 675 Windows

  1. Begin the process by placing the paper onto the paper feeding tray of the HP Smart Tank 675.
  2. Move over to the device and open the photo on the device and give a print.
  3. Ensure there is proper connectivity with the printer and the wireless connection.
  4. Check for proper connectivity from the printer to the computer.
  5. Make the necessary changes for the maximum output of the photo.
  6. Complete the process of printing photos using the HP Smart Tank 675.

How to print photos using the HP Smart Tank 675 on OS X and Mac

  1. Choose the file that should be printed using the HP Smart Tank 675 on OS X and Mac.
  2. Ensure the printer and the devices are connected to an active wireless connection.
  3. Make the necessary settings for the image that has to be downloaded.
  4. Complete making the settings of the HP Smart Tank 675 printer and ensure the print is accurate.
  5. Click Print to shoot the printout from the device to the HP Smart Tank 675 printer.

How to make copies on the HP Smart Tank 675

  1. Begin the process by placing the document on the glass scanner.
  2. Ensure the document is aligned well for the best results.
  3. Complete the process of making copies after making the settings.
  4. Click the number of copies that are required and click Print.
  5. With this, the number of documents that are required will be printed.

How to scan on the HP Smart Tank 675 printer

  1. Power up the HP Smart Tank 675 printer and the device.
  2. Place the desired document on the glass scanner.
  3. Proceeding this, make the required changes and settings that are needed.
  4. Ensure the document is aligned accurately to ensure the best results.
  5. Click Scan and choose the file type. Select PDF or JPEG.
  6. Based on the settings made, the file will be saved on the device.

HP Smart Tank 675 Printer - Scan to a computer

To enable the scan to a computer feature in the HP Smart Tank 675 - Windows

  1. To be able to use the scan feature, first, there should be a driver that is downloaded on the Windows device.
  2. The HP printer will require a scan utility driver that can be downloaded on the device.
  3. Place the desired document on the device and click the Scan option.
  4. Following this, make the necessary changes to the file and click the scan option.
  5. Choose the designated file location for it to be saved later.
  6. Make the settings as required. Choose Scan to Computer and choose the file format.
  7. Click Scan and the file will be saved on the device.

To enable the scan to a computer feature in the HP Smart Tank 675 - OS X and Mac OS.

  1. To be able to use the HP Smart Tank 675 Scan feature of the printer, it has to have an accurate printer driver.
  2. This driver can be downloaded from the official website on OS X or the Mac OS.
  3. The download file should be run on the device and the same has to be installed.
  4. The installation of the HP Smart Tank 675 scan driver should be completed by following all the on-screen instructions.
  5. Connect the HP Smart Tank 675 to the driver and begin using the scan feature of the printer.
  6. Take a test print to ensure the HP Smart Tank 675 printer is now connected to the device through the driver to scan files.
123 HP Support

Troubleshoot your hp printers problems with the help of our technical experts

123 hp customer support

How to change network setting on the HP Smart Tank 675 printer

To print network settings on the HP Smart Tank 675 printer

  1. Power up the HP Smart Tank 675 printer and move over to the control panel.
  2. Changes to the printer can be made directly by applying these changes through the control panel.
  3. Click the wireless option to check the status of the network connection on the control panel.
  4. Locate the printer info option to gain access to the network configuration page.
  5. Complete the process by making sure the networking settings are made as per the preference.

To change IP settings on the HP Smart Tank 675 printer

  1. Power up the HP Smart Tank 675 printer and allow it to remain idle for a few minutes.
  2. Move over to the wireless HP Smart Tank 675 printer and tap the control panel.
  3. Click the wireless settings option and add a new port. Click IP Printer Port Wizard to check the IP address of the printer.

How to change the connection type from USB to wireless in an HP Smart Tank 675 printer

  1. Power up the HP Smart Tank 675 printer and the device.
  2. Remove the cables connecting the printer and the device.
  3. This will remove the connection between the two devices.
  4. Ensure there is an active wireless connection for the printer to connect to.
  5. The connection should be active and stable and keep the printer close to the router.
  6. For this, choose the WPS push button method to connect to the wireless connection.
  7. Connect the printer to the wireless connection using the PS button.
  8. Press and hold the WPS push button on the printer and the router at the same time.
  9. The connection will be established between the printer and the wireless connection.

How to change the connection type from USB to wireless on the HP Smart Tank 675 printer from the Mac

  1. Begin the process by powering up the HP Smart Tank 675 printer and the device.
  2. Remove the USB cable connecting the printer and the device.
  3. Place the printer and the router close to each other and complete the connection.
  4. Ensure the wireless connection is active and it is in a stable working condition.
  5. Use the WPS push button method to connect the printer and the wireless connection.
  6. Give the process a few minutes and the connection will be established in a few minutes.