HP Deskjet 2722 wireless setup

• Switch ON your preferred HP Deskjet 2722 printer.
• Then, click the Cancel button and press the printer wireless button.
• Access the printer network settings option.
• After that, choose the option- Restore Network Settings.
• Now, your HP printer and the computer will be in connection with the same Wi-Fi.

• ON your computer and ensure to have a secure internet connection.
• Then, download the compatible HP Deskjet 2722 driver software on the computer.
• Move on to the device folder where you saved the software.
• Open the printer software file.
• Continue with the wizard steps and install it with the wizard procedure.

Here is the procedure to use the Push Button Configuration method is:

• Place your HP Deskjet 2722 printer near the wireless router.
• Turn ON the HP printer and access its control panel.
• Choose the Setup option and access the network setup menu.
• Then, select the displayed Push Button option.
• Move on to your printer wireless button and press it for some time.
• Lastly, move on to the wireless router, press its Wi-Fi button and hold on until the blinking light stops.

Here are the general steps to use the PIN method:

• Check and confirm that the printer paper tray has suitable sheets.
• Then, move on to the Windows/Mac device and switch ON it.
• Click- Printers and Scanners and choose- Add a Printer or Scanner.
• Access the menu- Wi-Fi Direct printer and select – HP Deskjet 2722 printer name.
• Choose the Add device button and copy the displayed WPS ID or PIN.
• Enter the WPS PIN once the printer screen prompts and finish the process.

The general steps to set up Wi-Fi network on HP 2722 printer using HP Smart App are:

• To begin with, power up the Mac computer.
• After that, download HP Smart App on the computer.
• Open the HP Smart App setup file on the computer.
• Continue with the procedure given on the screen and install HP Smart App.
• Open the installed software and move on to its settings.
• Make changes in the settings as per the requirements.
• Then, add the HP 2722 printer to the HP Smart App with the wizard steps.
• Finally, finish the HP Deskjet 2722 wireless setup.

The procedure for setting up Wi-Fi network on HP Deskjet 2722 using HP Smart App on Windows device is:

• To start with, activate the Windows computer.
• Then, download the software – HP Smart App on the Windows computer.
• Access the HP Smart App setup file and run it on the computer.
• Carry on with the on-screen procedure and install HP Smart App.
• Access the installed software & go to the settings section.
• Make necessary changes in the HP Smart App settings as per your requirements.
• Add the Deskjet 2722 printer to the installed HP Smart App using the on-screen steps.
• Lastly, complete the HP Deskjet 2722 wireless setup.

The general steps for connecting HP DJ 2722 printer and Windows OS using the printer software are:

• Power up the Deskjet 2722 printer and Windows computer.
• After that, make sure that the internet connection is stable on the computer.
• Check the Windows OS version and search for the compatible printer driver.
• Once you find the printer driver, download it on the Windows computer.
• Run the downloaded HP 2722 driver file on the computer.
• Proceed with the driver setup instructions given on the screen.
• Choose the wireless mode for connecting the printer and Windows device when the screen prompts.
• Then, proceed with the wizard steps and finish the DJ 2722 driver installation.

The instructions to connect DJ 2722 printer with the Mac device with the HP printer software are:

• Switch ON the HP 2722 printer and Mac computer.
• Then, ensure that the Mac computer has a secure internet connection.
• Know the Mac OS version and find the suitable HP 2722 printer driver.
• When you find the suitable printer driver setup file, save it on the Mac device.
• Extract the saved HP DJ 2722 driver setup file on the device.
• Continue with the driver setup process using the on-screen instructions.
• Select the wireless method to connect the HP printer and Mac device when the device screen asks.
• Finally, proceed with the on-screen procedure and complete DJ 2722 driver installation.

The steps for connecting the HP Deskjet 2722 printer and Windows device with a USB cable are:

• Power up the Windows computer and access- Change device installation settings.
• Choose Yes to continue and power up the Deskjet 2722 printer.
• Connect the USB cable to the printer port and computer port.
• You will see a “Found New Hardware” message on the screen.
• Search – Add a printer or scanner and click – Add a Printer or Scanner.
• Now, you will see your printer, click on it and continue.
• Choose- Add device and finish the process.
• If your Deskjet 2722 printer is not on the computer, then choose- The printer that I want isn’t listed.
• Access the window- Find a printer by other options.
• Then, choose- Add a local printer option.
• Continue with the on-screen procedure and finish the process.

The basic steps for connecting the Mac device and printer using a USB cord are:

• Remove the USB cable from the Mac computer if any cable is there.
• Then, delete the HP Deskjet 2722 printer from the Mac computer.
• Choose the Apple menu and select the option- System Preferences.
• After that, choose- Printers & Scanners to continue.
• Now, choose your HP printer and click the icon- minus.
• Restart your Mac computer and download HP Smart App on it.
• Extract the setup file of the HP Smart App on the computer.
• Install the HP Smart App on the Mac computer using the wizard steps.
• Open the installed HP Smart App on the device and make the necessary settings change.
• Choose the Add Printer option given on the screen.
• Add your HP printer to the app and finish the ongoing process with the wizard steps.