HP Smart Tank 675 Troubleshooting

HP Smart Tank 675 Printer Driver Unavailable

This is one of the most common errors that is faced by a printer owner. The steps below will assist in the process of resolving the HP Smart Tank 675 printer driver unavailable issue.
Begin the process by downloading the HP Easy Start Software.
Open the HP Easy Start Software and run a scan on the device.
Complete the prompts as instructed by HP Easy Start.
Check the wireless connection’s stability.
Update the HP Smart Tank 675 printer driver if needed.
Alternatively, uninstall the printer driver and reinstall it.
Restart the devices and continue to use the HP Smart Tank 675 printer driver.

Complete the first check of the wireless connection.
Make sure the wireless connection is active and stable.
The HP Smart Tank 675 printer and the device should be connected to the same wireless connection.
Restart the wireless connection router and the device.
Complete the connection again to connect the printer and the wireless connection.
Use the WPS push button method and connect the printer to the wireless connection.
Finally, the HP Smart Tank 675 Wifi Setup will be finished.

Begin the process by restarting the printer and the device.
Check if there is an active wireless connection.
The printer and the driver should be connected to the same wireless connection.
The wireless connection should be stable and functioning at the right speed.
Check if the printer is set to function online and ensure that it is the default printer.
For this, open the Settings app, locate the printer from the list, and click Set as Default.
Following this, check the printer driver. If there is an update available, complete it.

Begin the process by first checking if all the cables connecting the printer and the device are intact.
There should be no physical issues with the printer for the scanner to function properly.
Check if there is an active network connection for the printer and the device to connect to.
Check if there are any issues with the printer driver. Update the scan driver if needed.
Restart the printer by removing the power cord from the printer and the power cord.
Once it is powered up, complete the same for the device as well.
Take a test scan to ensure the changes have been applied.

Check if the HP Smart Tank 675 printer and the device are connected.
There should be an active wireless connection the devices should be connected to.
Ensure there is sufficient ink in the ink cartridges.
Update the HP Smart Tank 675 printer driver if needed.
Restart the printer by removing the power cord and allowing it to remain idle.
Connect it back and complete a final check of the printer and the device.
Reinstall the printer driver if needed to complete the last step to rectify the printer is not printing issue.

Power up the HP Smart Tank 675 printer and the device.
If the printer is not working, first, restart it and then proceed with the other changes.
Check if the HP Smart Tank 675 printer is set as the default printer.
Open the Settings app and choose the Control panel.
Select the HP Smart Tank 675 printer from the list, right-click and make the changes.
Select Set as Default, restart the printer and it will continue to function.