[Fixed] HP Officejet pro 8720 scannings and repairing drive stuck issue?
Below are the six proven steps to fix scanning and repairing driver stuck issues.
Step 1: Check the disc connection:
- Check if you have not displaced your computer in recent times.
- Cable connections between the systems can also cause scanning and repairing driver issues.
- Recheck the ports and cables connected to your PC.
Step 2: Wait for the scanning and repairing process to finish:
- The time for scanning and solving the drive depends on the PC.
- If the issue is minor, the process will not take too long.
- The process might take a long time if the problem is deep.
- Wait until the process is complete to continue with the further steps.
Step 3: Stop Windows from scanning and repairing the drive:
- First, press the power button to shut down your computer.
- You will see the “repairing automatic screen” window on powering up your device.
- Next, diagnosing your PC window will open. Press any button continuously before the disk-checking window opens.
Step 4: Disable automatic repair:
- Shut down your computer by tapping the power button on your PC.
- Switch on your device and wait for the PC logo.
- Switch on and turn off the computer.
- Now, power it on and wait for the PC to start without interruptions.
- Go to the options menu, choose the HP Officejet pro 8720 troubleshooting menu, click on advanced options, and click the command prompt.
- Restart the computer and check for the other steps.
Step 5: Enter safe mode and run CHKDSK:
- Shut down your computer by tapping the power button on your PC.
- Switch on your device and wait for the PC logo. Go to the power button to switch off your PC. Do it the other time also.
- Now, switch on your PC without interruptions.
- Go to the options menu, choose the troubleshooting menu, click on advanced options, and click the command prompt.
- Restart the computer, and enable the safe mode with networking.
- Right-click on your PC and tap on the properties menu.
- Now, go to the tools menu and tap on the check option.
Step 6: Recover data:
- Open the data recovery wizard.
- Go to the data storage location and tap on the scan menu.
- The recovery software will now run and find the lost data.
- Choose all the lost documents you need, and tap on the restore button.