Blinking light issue with your HP DeskJet 2742e Printer
You can see the power light in your HP DJ 2754e printer might blink at a steady pace whenever you operate your computer and a printing job is being deal with. Though, if the power light starts blinking faster than usual then in all probable cases it indicates that there is a technical error with the cartridges.
In accordance with all the respective cases, the power blinking lights specify that the door of the ink cartridge is open and it has to be closed properly.
You can also have similar reasons why the power light starts blinking could be
- It can be due to the print cartridge being blocked and unable to move remotely.
- You can see the paper inside the printer might get jammed and that should be cleared
- The cartridges might be facing some issues like ink is over or they are not fixed properly
- Eventually, the power light also blinks rapidly if the printer requests to be reset in reference to any technical error
- Finally, the other issue can be due to power lights that might start blinking quickly with no papers in the input tray or the printer’s output tray might not be closed properly.
In some cases, the white power light blinks may find to blink with orange light blinking on your HP printer. Let us now know what the orange blinking light specifies
Why is the orange light blinking on my HP printer?
If the HP printer starts indicating an orange light blink- it can be due to some technical issues with the printer cartridge or can be due to some toner issue.
You can also see, that it can start blinking due to the settings of the printer that might be corrupted and the configuration concerns. Let’s see how to resolve the orange light which is blinking on the HP printer.
How do fix it if the HP printer’s orange light starts blinking?
In order to fix the orange light that is flashing on your printer quickly, you need to access the below steps for efficient access:
- Place the new HP Deskjet 2742e printer in active state and carefully disconnect the power cord from the printer by pulling it off and placing it aside
- Then, you need to unplug the power cord from its source as well
- You are supposed to wait for a minute or two
- Attempt to reconnect the power cord to the outlet and the printer once again
- You can see your printer will now turn on and automatically restarts by itself.
- Finally, after the printer is turned to be active, you can easily fix the issue on your printer setup.
Yet, after attempting the above steps- you couldn’t connect properly from blink issues, you definitely need Professional team support to resolve them instantly.
Conclusion
Finally, hope- you have gathered some useful information via this blog and found it useful. Get our Technical assistance for your HP Deskjet 2742e Blinking issue.